Strange
256 produkter
Produkterne» Steering and Components» Rack and Pinions, Steering Boxes and Components» Rack And Pinions»
The price includes any freight from the supplier to the Store
Produktbeskrivelse
Vægt
3,2 kg(Produktet kan have let salgspakning.)
Tilgængelighed
Umiddelbart
Lagerbeholdning
Fremstillingsland
USA
KommentarerTilføj kommentar
Varemærke
Strange - S3448 - Door Car Steering Rack - 24 1/2" Tie Rod Centers
Product Images may differ from the actual product. Image may be a representation of this item.
The price includes any freight from the supplier to the Store
ProduktbeskrivelseStrange door car steering rack - 24 1/2" tie rod centers - S3448
Additional information
Application – Drag Race Door Cars
Description
Steering Rack & Pinion
22 to 1 ratio
24.5″ tie rod centers
20° horizontal pinion angle
9/16″-26 spline pinion – Same spline as Mustang / Pinto
0° vertical pinion angle as shipped
Pinion angle can be adjusted to 20° or 40° upward
4.25″ total rack travel
11.60″ mounting clamp centers
5.75 lbs
Features
Body
• 6061-T6511 billet aluminum
• Black anodized finish
Rack & Pinion Gear
• 4140 premium alloy steel
• Hardened rack & pinion gear
Clevis Ends
• 6061-T6511 billet aluminum
• Accepts 3/8″ high misalignment rod ends *
• Adjustable clevis angles
• Black anodized finish
Bellows
• High temperature silicone
Mounting Clamp – Pinion Side
• 6061-T6511 billet aluminum
• 7/16″-14 bolt holes on 1.25″ centers
• Black anodized finish
Mounting Clamp – Opposing Side
• 6061-T6511 billet aluminum
• 3/8″-16 bolt holes on 1.380″ centers
• Black anodized finish
* Rod Ends Not Included
Use HXAM-16T (RH threads) & HXAB-16T (LH threads)
Related Components
Tie rod fabrication kit……. S3449
Steering shaft u-joint…….. S3450
Vendor Part Number: S3448
Additional information
Application – Drag Race Door Cars
Description
Steering Rack & Pinion
22 to 1 ratio
24.5″ tie rod centers
20° horizontal pinion angle
9/16″-26 spline pinion – Same spline as Mustang / Pinto
0° vertical pinion angle as shipped
Pinion angle can be adjusted to 20° or 40° upward
4.25″ total rack travel
11.60″ mounting clamp centers
5.75 lbs
Features
Body
• 6061-T6511 billet aluminum
• Black anodized finish
Rack & Pinion Gear
• 4140 premium alloy steel
• Hardened rack & pinion gear
Clevis Ends
• 6061-T6511 billet aluminum
• Accepts 3/8″ high misalignment rod ends *
• Adjustable clevis angles
• Black anodized finish
Bellows
• High temperature silicone
Mounting Clamp – Pinion Side
• 6061-T6511 billet aluminum
• 7/16″-14 bolt holes on 1.25″ centers
• Black anodized finish
Mounting Clamp – Opposing Side
• 6061-T6511 billet aluminum
• 3/8″-16 bolt holes on 1.380″ centers
• Black anodized finish
* Rod Ends Not Included
Use HXAM-16T (RH threads) & HXAB-16T (LH threads)
Related Components
Tie rod fabrication kit……. S3449
Steering shaft u-joint…….. S3450
Vendor Part Number: S3448
Den omtrentlige pakkestørrelse eller størrelsen på produktets pakke er 108 x 115 x 712 mm.
Vægt
3,2 kg(Produktet kan have let salgspakning.)
Tilgængelighed
Umiddelbart
Leveringstid?
If the product is available at the Vantaa warehouse, it can be picked up or delivered—usually already within the same day.
When the product shows an estimated delivery time of 7–15 days, this is how the supplier‑warehouse order progresses.
Kontaktformular
Check also: leveringsbetingelser
Fremstillingsland
USAKommentarerTilføj kommentar
Varemærke
Inch Converter
Example: 2.375 = 2 3/8
Tip: rounded fraction is shown to the nearest 1/16.